777777cab Produkttechnik GmbH & Co KGm - set measuring unitThis command sets the measuring unit for the following label data.Once it is sent, all following settings in a label are measured in the selected unit.The printer´s default value depends on the selected display language. For all selectable countries themeasurement is millimeters, with the exception when country USA was set through the control panel.We recommend to use this command always, especially for international companies where differentprogrammers create labels as the measuring unit is only changed for the individual label beingprinted.The measuring unit cannot change within one label. All internal calculations are processed inmillimeters, as these values are better to overview and they follow a worldwide standard.m tCRm - Set measuring unit command.t = The measuring system desired,„m“ for metric (millimeters) or„i“ for historical (inches, tenths and hundredths of an inch).Syntax:
