256256256cab Produkttechnik GmbH & Co KGO - Set Print OptionsN = Negative (inverted) printout of the complete labelR = Rotate the label contents 180 degreesP = Printmode - backfeed option always / smartbackfeed „always“ feeds the label back and starts printing at thelabel margin, while „smart“ suppresses the feedback.„P“ activates the smart option while„D“ activates the „always“ option.This option overwrites temporarily the settings in the printer´ssetup.Using the „smart“ mode has the benefit that the printer processesthelabels faster as the time is saved for pulling the labels back.Nevertheless a negative effect may appear in the area where thelabel is stopped under the printhead. This may cause a smallhorizontal white line in the area. If this happens within an object,then you must select the „D“ option to avoid this effect.S = Single label buffer. The following label will be processed when theactual one has finished printing.T = Enables the „Tear off mode“ which feeds the label more forwardafter printing, so that it could be taken easier away.U = Unique label - suppresses the Pause / Reprint possibility to avoidthat a label will be printed twice.Important: The "O" command must be located directly after the label size command "S....."
