CAB a2+ Configuration Instructions

Also see for A2+: Operator's manual Operating instructions User configuration guide

CAB a2+ Configuration Instructions Manual pdf 12 page image

12 Configuration Instructions Edition 5/06Product descriptionA2+/A4+/A6+/A8+1.6.2 Label formatsBefore ordering label media, note the following permissible dimensions:Fig. 3: Label dimensionsTab. 4:Permissible label dimensionsAB CDEFGHIKLMDim. Designation, all dimensions in [mm] A2+ A4 + A6+ A8+A Label widthLabel width in peel-off mode4–6025–604–11625–11650–17650–17650–220—B Width of liner or endless mediumWith a medium thickness of E = 0.07 – 0.25With a medium thickness of E = 0.25 – 0.3525–6510–2520–12010–12050–180—50–235—C Label heightMinimum label heightMinimum label height in peel-off modeMaximum label height with printhead 203 dpiMaximum label height with printhead 300 dpiMaximum label height with printhead 600 dpi512—2000—512200020001000625—2000—10——1000—D Label gap 2–1000 2–1000 2–1000 2–1000E Label thickness 0.07–0.35 0.07–0.35 0.07–0.35 0.07–0.35F Liner thickness 0.07–0.35 0.07–0.35 0.07–0.35 0.07–0.35G Distance from 1st heating point to edge of liner 2 2 2 2.5H Distance from label sensor to edge of liner 5–53 5–53 5–53 5–53I Width of perforation mark >5 >5 >5 >5K Height of perforation mark 2–10 2–10 2–10 2–10L Width of reflex mark >5 >5 >5 >5M Height of reflex mark 2–10 2–10 2–10 2–10