CAB a2+ Configuration Instructions

Also see for A2+: Operator's manual Operating instructions User configuration guide

CAB a2+ Configuration Instructions Manual pdf 58 page image

58 Configuration Instructions Edition 5/06Memory cardsA2+/A4+/A6+/A8+8 Memory cardsYou can save graphics, fonts, label descriptions and database information for the long-term on a memorycard.You can use the following memory card types:• Type 1 CompactFlash card up to a maximum size of 1 GB in the corresponding card slot of the printeror in the external operating panel (cab accessory)• PC card (PCMCIA) in the corresponding card slot of the printer8.1 Insertion and removalFig. 23: Inserting memory card1. Slide memory card contact-side first into the slot as far as it will go.The rear section of the inserted memory card still extends from the device housing so that it can beremoved by hand.2. Press the menu button.3. Check whether the Memory card menu is shown in the display.If the Memory card menu is not shown in the display, it could be because:• you have not selected the card slot being used as the primary card slot• you have not inserted the memory card far enough into the card slot• you have entered the memory card incorrectlyAlways create a backup copy of the memory card in case of a malfunction.PCMCIA CFWhen the memory card is slid onto the contact pins, light physical resistance can be felt.Do not remove the memory card while it is being accessed. You can configure the printer so that accessto a memory card is indicated on the status line (see "4.1.5" on Page 26).