CAB a2+ Configuration Instructions

Also see for A2+: Operator's manual Operating instructions User configuration guide

CAB a2+ Configuration Instructions Manual pdf 60 page image

60 Configuration Instructions Edition 5/06Memory cardsA2+/A4+/A6+/A8+8.4 Memory card functions in the offline menuAccessing the Memory card menu is only possible if a memory card is installed.You can still only operate the card slot set in the menu Interfaces > Default card slot via theoperating panel (see "4.1.4" on Page 25). When operating via an interface, each card slot can beaddressed via a path.8.4.1 Loading labelYou can print labels whose descriptions are saved on the memory card using the Label from cardfunction.1. Select the Label from card function in the Memory card menu.2. Press the ↵ button.The name of the label found at the top of the index of the card is displayed.3. Select the desired label in the index of the card with the S and T buttons.4. Press the ↵ button.If you have selected a label which was saved with a fixed label quantity, the print job is started imme-diately.For label descriptions with a variable label quantity, you are requested by the display to enter the labelquantity .If additional input on the label description is required, the display requests you to enter the variabledata .5. Enter the label quantity/variable data with the following buttons:W cursor leftX cursor rightS increase value at cursor position by 1 or select next letter in alphabetT decrease value at cursor position by 1 or select previous letter in alphabet6. Press the ↵ button briefly to confirm the input and start the print job.Canceling input:You can cancel the selection of the label and the label quantity at any time by pressing and holding the↵ button (at least 2 seconds).8.4.2 Printing card indexYou can print out the index of the installed memory card with the Print directory function.1. Insert printable medium (labels, endless paper) which extends across the entire printing width.2. If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximumwidth.3. Press the menu button.4. Select the Print directory function in the Memory card menu.5. Start printout with the ↵ button.The printout contains:• the name of the memory card• information on the saved files• the size of the available memory area