CAB a2+ Configuration Instructions

Also see for A2+: Operator's manual Operating instructions User configuration guide

CAB a2+ Configuration Instructions Manual pdf 41 page image

A2+/A4+/A6+/A8+Test functionsEdition 5/06 Configuration Instructions 415.4 Font listThe Font list function prints the most important parameters of the fonts available in the printer in tab-ular form. The table contains both the original fonts in the printer and other fonts loaded into the printer.The printout occurs using the heat level and print speed specified in the Setup > Print param. menu.1. Insert printable medium (labels, endless paper) which extends across the entire printing width.2. If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximumwidth.3. Press the menu button.4. Select Test > Font list menu.5. Start printout with the ↵ button.You can cancel the printout with the cancel button.Fig. 14: Font listThe parameters have the following meaning:Tab. 18:Parameters of the Font listThe printout occurs without taking the label gaps into consideration. This is why endless media are mostsuitable for this purpose.Column MeaningNo. ID number of the font required for programming (command T).Name Name with which the font is saved internally.Type Type of font generation. It provides information on the variability of the font and isimportant when programming (command T).Description Explanations of the font: size, font family. The printout occurs in the appropriatefont.