Using Müse108The Medication MonitorThe Medication Monitor tracks the infusion of medication administered for medications that affectpatient physiology. To activate the Medication Monitor, from the Run screen, click the MedicationMonitor button in the bottom, right portion of the screen.The Medication Monitor ButtonThe Medication Monitor appears as a movable box on the Run screen.The Medication MonitorThe normalized effector site concentration is shown next to each medication listing.The Reset button is used to clear a medication from the physiological model and the MedicationMonitor.To close the Medication Monitor, press the Close button in the upper right corner of the medicationMonitor window.Resetting a MedicationTo reset a medication from the Medication Monitor, click the Reset button on the Medication Monitor.The Reset Medication dialog box appears, asking you to confirm that you wish to reset the medication.The Reset Medication Dialog BoxThe medication is cleared from the model and from the Medication Monitor.With continuous infusions, the amount infused goes back to zero, but the infusion continues. To stop theinfusion, you must select the medication from the medication library and set the infusion rate to zero.Medicationname The ResetbuttonThe ClosebuttonNormalized effectorsite concentrationThe Reset button
