104BTTracer Protocol Analyzer User’s ManualCATC Version 1.09.3 TooltipsYou can get additional information abouteach field in a trace by holding yourmouse pointer over a field. A tooltip willappear with details about the field.9.4 Set MarkerNote The Set Marker works in conjunction with the Go to Marker feature.You can define a unique Marker for each packet.To place a marker on a packet,Step 1 Left-click on Packet # for the packet you wish to mark.CAC Channel Access CodeTrail Access Code Trailer of the Sync wordAddr Active Member AddressDM1 DM1 Packet TypeFlow ACL Link Flow ControlArqn Acknowledgment Indication FlagSeqn Sequential NumberingHEC Header Error Correction CodeL_CH LMP MessageL2FL L2CAP Flow Control FlagLen Message Length in Bytes including OpcodeTID LMP Transition initiated by MasterOpcode LMP-host_connection_reqCRC Cyclic Redundancy CheckAck’d Packet Acknowledgment based on subsequent packet’s ARQN withsame AM_ADDRIdle Idle Time in nanosecondsTime Stamp Decimal in Seconds.Milliseconds.Microseconds*10This is the analyzer internal clock as a reference with resolution of100 ns.Packet:# Packet/Event Number
