33BTTracer Protocol Analyzer User’s ManualCATC Version 1.05.3 Status BarThe Status Bar is located at the bottom of the main display window.Depending on the current activity, the bar can be divided into as many asfour segments.Recording ProgressWhen you begin recording, the left-most segment of the Status Bar displaysa Recording Progress Indicator:As recording progresses, the Progress Indicator changes to reflect therecording progress graphically:• In the Progress Indicator, a black vertical line illustrates the location of theTrigger Position you selected in Recording Options.— Pre-Trigger progress is displayed in the field to the left of the TriggerPosition in the before-Trigger color specified in the Display Options.— When the Trigger Position is reached, the progress indicator wiggles as itwaits for the trigger.— After the trigger occurs, the field to the right of the Trigger Position fillsin the post-Trigger color specified in the Display Options.— When recording is complete, the upper half of the progress indicator fillsin white, indicating the progress of the data upload to the host computer.You should be aware of two exceptional conditions:• If a Trigger Event occurs during the before-Trigger recording, thebefore-Trigger color changes to the after-Trigger color to indicate that not allthe expected data was recorded pre-Trigger.• When you click Stop before or after a Trigger Event, the Progress Bar adjustsaccordingly to begin uploading the most recently recorded data.The Progress Bar fills with color in proportion to the specified size andactual rate at which the hardware is writing and reading the recordingmemory. However, the Progress Indicator is normalized to fill the spacewithin the Status Bar.
