35BTTracer Protocol Analyzer User’s ManualCATC Version 1.0During uploading, this segment displays the percent of the upload processcompleted.Note If packets are filtered from the recording or data are truncated, the recordingactivity is reduced.In addition to showing activity, the third segment of the Status Bar will alsodisplay the radio signal strength in dBm received by the analyzer. BTTracercan display five possible values:• below -60 dBm• - 60 dBm• - 50 dBm• - 40 dBm• above - 40 dBmThe valid range for a signal is between -70 and - 20 dBm.Search StatusThe rightmost segment displays the current search direction: Fwd (forward)or Bwd (backward).Zoom InZoom In increases the size of the displayed elements, allowing fewer (butlarger) packet fields per screen.• Click on the Tool Bar.Zoom OutZoom Out decreases the size of the displayed elements, allowing more (butsmaller) packet fields per screen.• Click on the Tool Bar.5.4 Tool TipsThroughout the application, tool tips provide useful information.To display a tool tip, position the mouse pointer over an item. The tool tipdisplays in a short moment if present. Tool tips can also be found over theTool Bar and in areas of the packet view screen.
