TROUBLESHOOTING5-45.2.2 Alarm MessagesAlarm messages (Table 5-3) describe events that occur within theMicroMMAC-T. To view the Alarm Messages queue, press the Displaybutton (Figure 5-1) and hold for five seconds. Press the Display button toscroll through each message. If the Display button is not pressed againwithin ten seconds, the display defaults back to the product name.Table 5-3. Alarm MessagesDisplayedMessages SignificanceNO MESSAGESIN QUEUENo alarm messages in queue. This is the AlarmMessages default setting.TPIMInsertedTPIM inserted into RI or RO.TPIMRemovedTPIM removed from RI or RO.Stack xInsertedThe x Stack inserted (where x is any value from 2 to5).Stack xRemovedThe x Stack removed (where x is any value from 2 to5).Stack x Port xxViolationIndicates unauthorized attempt to access net worklobe ports.uMMACT Port xxViolationIndicates unauthorized attempt to access networklobe ports.RingBeaconingIndicates a station is attempting to recover from ahardware problem on the ring.BeaconRecoveredIndicates the ring has recovered from a beaconingsituation.uMMACT Port xxRemovedIndicates that a station has been removed from thering as a result of the beacon recovery process
