TROUBLESHOOTING5-35.2.1 Static System MessagesStatic System messages (Table 5-2) display MicroMMAC-T configurationinformation. To view them, press and release the Display button(Figure 5-1). Press the Display button to scroll through each message. Ifthe Display button is not pressed again within ten seconds, the displaydefaults back to the product name.Table 5-2. Static System MessagesDisplayed Message SignificanceIP Addressxxx.xxx.xxx.xxxDisplays current IP address. This can be changed viaLocal ManagementMAC Addressxx.xx.xx.xx.xx.xxDisplays Hardware or MAC addressRAM ImageRev. xx.xx.xxDisplays currently executing imageBoot PROMRev. xx.xx.xxDisplays internal Boot PROM version numberFlash Programmedxx TimesDisplays number of times Flash EEPROM has beenprogrammed.COM 1Baud Rate xxxxxxDisplays COM 1 Port’s current Baud rateCOM 1Function xxxxxxDisplays COM 1 Port’s current function (LocalManagement console, UPS, or SLIP)COM 2Baud Rate xxxxxxDisplays COM 2 Port’s current Baud rateCOM 2Function xxxxxxDisplays COM 1 Port’s current function
