LOCAL MANAGEMENT4-142. Toggle between ENABLED and DISABLED to make your selection.3. Highlight the SAVE command and then press the Return key.The “SAVE” message appears on the screen indicating that yourselection was saved to memory and the new value of the field takeseffect.To set the Number of Retries field:1. Highlight the Number of Retries field and type in an allowed value.2. Highlight the SAVE command and then press the Return key.The “SAVE” message appears on the screen indicating that yourselection was saved to memory and the new value of the field takeseffect.To set the Retry Interval field:1. Highlight the Retry Interval field and type in an allowed value (inincrements of 7 only).2. Highlight the SAVE command and then press the Return key.The “SAVE” message appears on the screen indicating that yourselection was saved to memory and the new value of the field takeseffect.Setting COM 1 and COM 2 ApplicationsYou can select COM port settings for LM, SLIP, UPS, Telnet, or a modem.1. Highlight the COM port field and toggle to selection.2. Highlight the SAVE command and then press the Return key.The “SAVE” message appears on the screen indicating that yourselection was saved to memory and the new value of the field takeseffect.4.3.3 The SNMP COMMUNITY NAMES ScreenUse the SNMP COMMUNITY NAMES (Figure 4-6) screen to establishSNMP community names for the MicroMMAC-T. Community names
