REQUIREMENTS/SPECIFICATIONS2-15to the average power measurement to correctly compare the average powervalues measured to the values listed above (i.e., -33.5 dBm average + 3 dB= -30.5 dBm peak).2.5 GENERAL SPECIFICATIONSCabletron Systems reserves the right to change the following operatingspecifications at any time without notice:• Data Buffer Memory (RAM): 8 MB (Upgradeable)• Internal Processor: Intel 80C960CF at 24 MHz• Controller: Texas Instruments TMS380C26• Static RAM: 128 KB with battery back-up• EPROM: 128 KB• FLASH MEMORY: 2 MB (Upgradeable)2.5.1 Power Supply RequirementsNOTE: The MicroMMAC-T has a universal power supply which willaccept input power between 85 and 264 VAC, 47-63 Hz.The power supply has two outputs of +5 volts and +12 volts. Maximumoutput power is 125 watts and the minimum efficiency is 65% under allconditions of line at full load. The minimum and maximum load currentfrom each output is shown below.2.5.2 Environmental RequirementsOperating Temperature: +5° to +50°CTable 2-10.Output Min. Load Max. Load Max Power+ 5 Volts 1.00 Amps 15 Amps 75 Watts+12 Volts 0.15 Amps 4 Amps 48 Watts
