Cabletron Systems NBR-220 Management Manual

Also see for NBR-220: Installation guide

Contents

System Level Screen FieldsNBR-SERIES Local Management Guide4-53. Press ENTER. If the IP address entered was a valid format, the cursorreturns to the beginning of the Host IP Address field. If the entry wasnot valid, the Event Message field displays “INVALID IP ADDRESSOR FORMAT ENTERED”. Local Management does not alter thecurrent value and refreshes the Host IP Address field with the previousvalue.4. Use the arrow keys to highlight the SAVE command field.5. Press ENTER. The Event Message field at the top of the screendisplays “SAVED OK”. This message flashes briefly, then the EventMessage line will display “System Reboot in Progress....” LocalManagement will be terminated and the screen will freeze while theNBR resets.4.1.4 Setting the Out of Band IP AddrSetting the Out of Band Address is not supported at this time.4.1.5 Setting the Subnet MaskSubnets are logical divisions of the network. To change the subnet maskfrom its default value, perform the following steps:1. Use the arrow keys to highlight the Subnet Mask field.2. Enter the subnet mask using Decimal Dotted Notation (DDN) format.Values for each decimal must range from 0-255.For example: 255.255.0.0NOTEAfter the NBR resets, the Password screen appears and youmust re-enter Local Management.