Selecting the Update-FreqNBR-SERIES Local Management Guide11-3Admin StatusThis field displays the administrative status of the selected interface. Thepossible status messages are LISTENING, LEARNING, orFORWARDING.Update-FreqUse this field to select the time interval between Network/Slot/Portcounter updates. You can select update intervals in increments of 3seconds, with the maximum interval being 99 seconds.NetworkThis command field allows you to select the network(s) you want tomonitor. The choices range from A to F, depending on the configurationof your network and the options available from this configuration. Forexample, if you do not have a device running on the A Channel, the NBRautomatically disallows Channel A as a network selection.11.2 SELECTING THE UPDATE-FREQThe NBR updates the Bridge Statistics screen every 3 seconds by default.The UPDATE-FREQ command allows you to adjust the frequency inintervals of 3 seconds. The maximum update frequency is 99 seconds.To adjust the UPDATE-FREQ, perform the following steps:1. Use the arrow keys to highlight the UPDATE-FREQ command field.2. Press SHIFT and [+/=] or [–] until the desired time/frequency appears(this number increments/decrements in 3 second intervals with aminimum of 3 seconds and a maximum of 99 seconds).3. Press ENTER.