Cabletron Systems NBR-220 Management Manual

Also see for NBR-220: Installation guide

Contents

Chapter 7: The FLASH Download Screen7-4NBR-SERIES Local Management Guide7.2.1 Changing the Download Server IPTo change the IP address of the FLASH Download server, perform thefollowing steps:1. Use the arrow keys to highlight the DOWNLOAD SERVER IP field.2. Type the IP address of the server to be used for the download.3. Press ENTER. The Event Message field at the top of the screendisplays “SAVED OK”.7.2.2 Changing the Download File NameTo change the name of the firmware image file that Local Managementloads from the FLASH Download server, perform the following steps:1. Use the arrow keys to highlight the DOWNLOAD FILE NAMEfield.2. Type the complete path and filename of the new image file to bedownloaded. You must include all directories and subdirectoriesinvolved in accessing the file. Type the new entry over the previousentry.3. Press ENTER. The Event Message field at the top of the screendisplays “SAVED OK”.7.3 PERFORMING A FLASH DOWNLOAD OPERATIONPerform a FLASH download using either of the following methods:1. Use the arrow keys to highlight the EXECUTE command fieldlocated at the bottom of the FLASH Download screen.2. Press ENTER to begin the download. The NBR attempts to downloadthe file using the IP address, filename, and path provided.