SmartSwitch ATM Switch Reference Manual 2-99LECSELANLECLECSELANLECUse LECSELANLEC to manage the way an LECS configures (assigns) a LANE client to an ELAN using thebyBestEffort assignment policy. At least one instance of the byBestEffort assignment policy is always in effect at thelowest priority level. Under the byBestEffort policy, client assignment is based on (in this order): ELAN name in theconfiguration request (if any), client IP address, client MAC address (or for a token ring client, route descriptor), clientATM address. LECSELANLEC also associates a TLV parameter set with the specified LANE client. After the clientis assigned to an ELAN, the LECS uses the TLV information to negotiate the quality of connection given the client bythe ELAN.Note Use LECSELANPolicy to set and manage ELAN assignment policies.Operatorsadd, delete, modify, showParametersInput Parameter Description Value/Field Size Default[ATMAddress] ATM address of the client. 13-20 byte hex-based/Up to 59 charactersNo default[MACAddress/RouteDesc]MAC (media access control) address/RouteDescriptor of the client.SegId: 0-4095Bridge Num: 0-15No default[Layer3Address(IP)] IP address of the client. Dot decimal/7-15 charactersNo default[ELANNumber] Number of the ELAN preferred for the client. 0-125 0[TLVSet] TLV set number associated with the client. 1-32767 No defaultOutput Parameter Description[Elan #] Number of the ELAN preferred for the client. (Same as the [ELANNumber] inputparameter.)[MacAddr/ RouteDesc] MAC (media access control) address/Route Descriptor of the client. (Same as the[MACAddress/RouteDesc] input parameter).[LECAddress] ATM address of the client.
