SmartSwitch ATM Switch Reference Manual 2-205PnniStatsPnniStatsUse PnniStats to display PNNI statistics for the switch.OperatorsshowParametersThis parameter has no input parameters. Just enter show pnnistats at the switch prompt.DescriptionsOutput Parameter Description[Highest Version] The highest version of PNNI protocol that the switch supports.[Lowest Version] The lowest version of PNNI protocol that the switch supports.[DTL Count Originator] Number of DTL stacks that the switch has originated as the DTLOriginatorand placed into signalling messages. This includes the initial DTL stackscomputed by the switch. It also includes any alternate route (second choice,third choice, etc.) DTL stacks computed by the switch in response tocrankbacks.[Crankback Count Originator] Number of connection setup messages including DTL stacks originated by theswitch that have cranked back to the at all levels of the hierarchy.[Alternate Route Count Originator] Number of alternate DTL stacks that the switch has computed and placed intosignalling messages as the DTLOriginator.[Route Fail Count Originator] Number of times the switching system failed to compute a viable DTL stackas the DTLOriginator for some call. It indicates the number of times a call wascleared from this switching system due to originator routing failure.[Route Fail Unreachable Originator] Number of times the switching system failed to compute a viable DTL stackas the DTLOriginator because the destination was unreachable; that is, thosecalls that are cleared with the following in the cause information element (IE):Specified Transit Network Unreachable, or Destination Unreachable.Operator Parameters / Permissions DescriptionshowpnnistatsAdministrator Shows PNNI statistics for the switch.
