SmartSwitch ATM Switch Reference Manual 2-207PnniSummaryAddressPnniSummaryAddressUse PnniSummaryAddress to manage summary address prefixes for the switch. A summary address is an abbreviationof a set of addresses, represented by an address prefix that all of the summarized addresses have in common. Theswitch advertises this information. Calls to any destinations matching the summary address may be routed to theswitch.Operatorsadd, delete, showParametersInput Parameter Description Value/Field Size Default[Num] Index number of the summary address as assignedby the console. Use the show pnnisummaryaddressall command to get a list of index numbers.Positive integer or All All[Node Index] Identifier of a logical node on the switch. Positive integer 1[SummaryAddress] ATM end system address prefix for the summary. No default[PrefixLength] The prefix length (in bits) for the summary. No default[SummaryType] Address type. Internal, Exterior Internal[Suppress] Whether or not the switch advertises the summariesto its peer group. Possible values are: True andFalse. False specifies the summary is advertised.True specifies the summary is not advertised (issuppressed).False, True FalseOutput Parameter Description[Num] Index number of the summary address as assigned by the console.[Summary Address] ATM end system address prefix for the summary.[Summary Type] Address type.[Suppress] Whether or not the switch advertises the summaries to its peer group.If you give a specific [Num], the show pnnisummaryaddress command displays the following additional fields.
