2-276 SmartSwitch ATM Switch Reference ManualSigStatisticsSigStatisticsUse SigStatistics to display signaling statistics of a port.Note The following applies to SmartSwitch 6500 only: You can hot-swap TSMs.Hot-swapping is replacing a module when the chassis is powered up. If youreplace a TSM with another TSM of the same type (same I/O ports), existingconfiguration of port parameters is not affected. This includes parameters setusing any of the following attributes: ATMRoute, CACServiceClassBw,IlmiConfig, NetPrefix, Port, PortConfig, PVC, PVP, ServiceRegistry, SigTimer,SigStatistics, SSCOPConfig, and SSCOPStatistics. If you replace a TSM withanother TSM of a different type, existing configuration of port parameters isdeleted. The deletion occurs when the new module is plugged into the chassisbackplane.OperatorshowParametersInput Parameter Description Value/Field Size Default[PortNumber] Port number on the switch.You can specify a physicalor virtual port.A1 to B4 (physical-2500 family),A1.n to B4.n (virtual-2500 family),1A1 to 8B4 (physical-6500),1A1.n to 8B4.n (virtual-6500),or AllAllOutput Parameter Description[Port#] Port number on the switch. (Same as the [PortNumber] input parameter.)[Detect Setup Attempts] Number of set-up messages received.[Emit Setup Attempts] Number of set-up messages transmitted.[Detect Unavailable Routes] Number of SVC calls rejected by this switch because of unavailable IISP or UNIroutes generated on other switches.[Emit Unavailable Routes] !÷ìLi¿ úv .7+ V>èè√ ¿içiVÕi` Lfl ÕÖà√ √›àÕVÖ LiV>÷√i úv ÷ò>‹>àè>Lèi 77.+ ú¿ 2!7¿ú÷Õi√ }iòi¿>Õi` úò ÕÖà√ √›àÕVÖ∞
