Repeater Statistics Screen6E123-50 and 6E133-49 User’s Guide5-1075.32 REPEATER STATISTICS SCREENOperating statistics for each repeater port (1 through 48) and itscorresponding network (ENETs 1 through 4) are displayed via theRepeater Statistics screen shown in Figure 5-38.To access the Repeater Statistics screen, use the arrow keys to highlightthe REPEATER STATISTICS menu item on the Module StatisticsMenu screen and press ENTER. The Repeater Statistics screen displays.Figure 5-38 Repeater Statistics Screen for Repeater Ports (1 – 48)The following definitions explain each field of the Repeater Statisticsscreen:Network # (Read-Only)Indicates the current Ethernet Network (ENET 1 through ENET 4) portfor which statistics are displayed. This field is automatically set byselecting a port number in the PORT # command field at the bottom ofthe screen. For example, if 14 is selected in the PORT # command field,the statistics for Network 2 (ENET 2) displays along with the statistics forthe selected port. If 46 is selected, the statistics for Network 4 (ENET 4)and port 46 displays.Firmware Revision: XX.XX.XXRepeater Statistics2269-00Module Type: 6E123-50BOOTPROM Revision: XX.XX.XXRETURNCLEAR COUNTERS EXITSlot Number:X6E123-50 LOCAL MANAGEMENTEvent Message LinePORT #: xxBytes Received:Frames received:Total Errors:Collisions:OOW Collisions:CRC Errors:Alignment Errors:Undersize Packets:Oversize PacketsBroadcastsMulticasts:Link Status:Admin Status:Network #: xx1234512345123451234512345123451234512345123451234512345LinkEnabledPort #: xx1234512345123451234512345123451234512345123451234512345LinkDisabled
