Port Redirect Function Screen6E123-50 and 6E133-49 User’s Guide5-31Destination Module [n] (Selectable)Allows a selected module [n] to be configured as a destination module.Destination Port [n] (Selectable)Allows a selected port [n] to be configured as a destination port.Errors (Toggle)Allows the user to configure the source modules and ports to either senderrored frames to selected destination modules and ports (ON option), orto drop errored frames, and send only valid traffic to the destinationmodules and ports (OFF option). The default setting of this field is ON.Status (Toggle)Allows the user to add or delete the source/destination modules and portsselected in the Source/Destination Modules and ports fields.5.11.1 Displaying the Source and Destination EntriesThere can be more than one Port Redirect Function screen depending onthe number of port redirect entries. Each screen displays up to ten portredirect entries. If there is more than one screen of redirect entries, theNEXT and/or PREVIOUS command is displayed at the bottom of thescreen, allowing the user to navigate to the next or previous screen.To display the next screen, use the arrow keys to highlight NEXT. PressENTER and the next screen of entries is displayed.To display the previous screen, use the arrow keys to highlightPREVIOUS. Press ENTER to view the entries in the previous screen.5.11.2 Changing Source and Destination PortsAdd or delete source/destination module and port entries as follows:1. Use the arrow keys to highlight the Source Module field.2. Press the SPACE bar or BACKSPACE one or more times to incrementor decrement the module number displayed in the brackets [n] until theappropriate module number is displayed.3. Use the arrow keys to highlight the Source Port field.
