Cabletron Systems SmartSwitch 6000 User Manual

Contents

Cabletron Systems SmartSwitch 6000 User Manual Manual pdf 177 page image

FE-100F36E123-50 and 6E133-49 User’s GuideB-3B.3 FE-100F3The FE-100F3 shown in Figure B-3 uses an SC style connector thatsupports single mode fiber optic cabling. Specifications for the FE-100F3are listed in Table B-2.Figure B-3 FE-100F3Table B-2 Transmitter PowerCable Type Worst Case Budget Typical Budget8/125 μm fiber >10.0 dB <10.0 dB12/125 μm fiber >10.0 dB <10.0 dBNOTEThe transmitter power levels and receive sensitivity levels listedare peak power levels after optical overshoot. A peak powermeter must be used to correctly compare the values givenabove to those measured on any particular port. If power levelsare being measured with an average power meter, add 3 dB tothe measurement to compare the measured values to thevalues listed above.FE-100F365