Enabling Security and Traps7-15Security5. Click mouse button 1 on to save your changes; the new statuswill be displayed in each field to the right of the field name. Click onto exit the window.Module-level Security and TrapsLocking ports at the module level applies all applicable protections (as configuredvia the Port Security window) to each port on the selected module or modules.To enable or disable locking and/or traps at the module level:1. In the Repeater Security window, click to select the appropriate repeaterinterface in the scroll list.2. Click mouse button 1 on ; the Channel X Module Securitywindow, Figure 7-6, will appear. Note that the current module-level settingsare displayed in the list box; a repeater whose ports have different SecurityMode or Trap settings will display a status of “Mismatch.”NOTEIf you select a group of modules whose ports have different security capabilities, you maystill be able to select and apply security states which are not applicable to all ports.Applying these kinds of settings will have no adverse affect on your network devices:those ports which can accept the set will do so; those which cannot will either ignore theset or issue a Set Failed.Note, too, that if you are configuring locking or traps for a TPXMIM in multi-channelmode, the settings applied via the module window will only apply to those portscommunicating on the channel selected in the main Security window.
