Chapter 5: Local Management5-542M46-04R/2M46-04RDC User’s GuideThe following definitions briefly explain each field of the Port RedirectFunction screen:Source Port (Read-only)Shows which ports are currently set as source ports.Destination Port (Read-only)Shows which ports are currently set as destination ports.Remap Errors (Read-only)Shows whether destination ports are receiving errored frames and validtraffic (ON) or just valid traffic (OFF).Source Port [n] (Selectable)Allows a selected port [n] to be changed to a source port.Destination Port [n] (Selectable)Allows a selected port [n] to be changed to a destination port.Errors (Toggle)Allows the user to configure the source ports to send errored frames andvalid traffic to selected destination ports (ON), or to drop errored frames,and send only valid traffic to the destination ports (OFF). The defaultsetting of this field is ON.Status (Selectable)Allows the addition or deletion of source and destination ports selected inthe Source Port [n] and Destination Port [n] fields.5.16.1 Displaying the Source and Destination EntriesThere can be more than one Port Redirect Function screen depending onthe number of port redirect entries. Each screen displays up to 10 portredirect entries. If there is more than one screen of redirect entries, theNEXT and/or PREVIOUS command is displayed at the bottom of thescreen, allowing the user to navigate to either the next or previous screen.
