Chapter 5: Local Management5-162M46-04R/2M46-04RDC User’s Guide5.7 GENERAL CONFIGURATION SCREENThe General Configuration screen, Figure 5-9, allows the user to, amongother things, set the system date and time, IP address and subnet mask, thedefault gateway, the TFTP gateway IP address, the operational mode, andthe COM port configuration.To access the General Configuration screen from the DeviceConfiguration Menu screen, use the arrow keys to highlight theGENERAL CONFIGURATION menu item and press ENTER. TheGeneral Configuration screen displays.Figure 5-9 General Configuration ScreenThe following briefly explains each General Configuration screen field:MAC Address (Read-Only)Displays the base physical address of the 2M46-04R.IP Address (Modifiable)Displays and allows the user to set the IP address for the 2M46-04R. Toset the IP address, refer to Section 5.7.1. The IP address can also be setthrough Runtime IP Address Discovery as previously described inSection 1.3.5.Firmware Revision: XX.XX.XXGeneral Configuration2314-15Device Type: 2M46-04RBOOTPROM Revision: XX.XX.XXMAC Address:IP Address:Subnet Mask:Default Gateway:TFTP Gateway IP Addr:Device Date:Device Time:Screen Refresh Time:Screen Lockout Time:Device Uptime XX D XX H XX MCom 1: [ENABLED] Application: [LM]Clear NVRAM: [NO] IP Fragmentation [ENABLED ]Operational Mode: [802.1D SWITCHING]2M46-04R LOCAL MANAGEMENTEvent Message LineRETURNSAVE00-00-ID-00-00-000.0.0.00.0.0.0NONE DEFINED0.0.0.011/29/9714:23:0003 sec.15 min.EXIT
