Port Redirect Function Screen2M46-04R/2M46-04RDC User’s Guide5-555.16.2 Changing Source and Destination PortsAdd or delete source port and destination port entries as follows:1. Use the arrow keys to highlight the Source Port field.2. Press the SPACE bar or BACKSPACE one or more times to incrementor decrement the port number displayed in the brackets [n] until theappropriate port number is displayed.3. Use the arrow keys to highlight the Destination Port field.4. Use the SPACE bar or BACKSPACE to step to the appropriate portnumber for the destination port.5. Use the arrow keys to highlight the Errors field.6. Use the SPACE bar to select either the ON or OFF setting and pressENTER. ON forces the source port to forward errored frames andvalid traffic to the destination port(s). OFF forces errored frames to bedropped before forwarding traffic.7. Use the arrow keys to highlight the Status field.8. Use the SPACE bar to select either the ADD or DEL (delete) option.Press ENTER. This adds or deletes the port selections made in steps 2and 4 and also updates the screen Source Port and Destination Port list.9. Use the arrow keys to highlight SAVE at the bottom of the screen.Press ENTER. The message “SAVED OK” is displayed. This savesthe new settings and updates the Source Port and Destination Portread-only fields.NOTETo redirect more than one port, repeat steps 1 through 8 foreach additional setting, then go to step 9 to save all the newsettings at once.
