PARK TILT MIRRORSIf your vehicle has this feature, it allows you to selectwhether or not the outside mirror(s) will automatically tiltdown when the vehicle is shifted into REVERSE (R).See Park Tilt Mirrors on page 2-42 for more information.Press the customization button until PARK TILTMIRRORS appears on the DIC display. Press theset/reset button once to access the settings forthis feature. Then press the menu up/down button toscroll through the following settings:OFF (default): Neither outside mirror will be tilted downwhen the vehicle is shifted into REVERSE (R).DRIVER MIRROR: The driver’s outside mirror will betilted down when the vehicle is shifted intoREVERSE (R).PASSENGER MIRROR: The passenger’s outsidemirror will be tilted down when the vehicle is shifted intoREVERSE (R).BOTH MIRRORS: The driver’s and passenger’s outsidemirrors will be tilted down when the vehicle is shiftedinto REVERSE (R).NO CHANGE: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.EASY EXIT RECALLIf your vehicle has this feature, it allows you to selectyour preference for the automatic easy exit seat feature.See Memory Seat, Mirrors and Steering Wheel onpage 1-4 for more information.Press the customization button until EASY EXITRECALL appears on the DIC display. Press the set/resetbutton once to access the settings for this feature.Then press the menu up/down button to scroll throughthe following settings:DOOR BUTTON ONLY: No automatic seat exit recallwill occur. The recall will only occur after pressingthe easy exit seat button.BUTTON AND KEY OUT (default): If the features areenabled through the EASY EXIT SETUP menu, thedriver’s seat will move back, and if the vehicle has thepower tilt wheel and telescopic steering feature, thepower steering column will move up and forward whenthe key is removed from the ignition or after pressingthe easy exit seat button.The automatic easy exit seat movement will only occurone time after the key is removed from the ignition.If the automatic movement has already occurred, andyou put the key back in the ignition and remove it again,the seat and steering column will stay in the originalexit position, unless a memory recall took place prior toremoving the key again.3-92
