Programming the Power WindowsIf the battery on the vehicle has been recharged,disconnected, or is not working, you will need toreprogram each front power window for the express-upfeature to work. Before reprogramming, replace orrecharge the vehicle’s battery.To program each front window, follow these steps:1. With the ignition in ACC/ACCESSORY, ON/RUN, orwhen Retained Accessory Power (RAP) is active,close all doors.2. Press and hold the power window switch until thewindow is fully open.3. Pull the power window switch up until the window isfully closed.4. Continue holding the switch up for approximatelytwo seconds after the window is completelyclosed.The window is now reprogrammed. Repeat the processfor the other windows.Window Lockouto (Window Lockout): The rear window lockout buttonis located on the driver door near the window switches.Press the right side of the button to disable the rearwindow controls. The light on the button will illuminate,indicating the feature is in use. The rear windows still canbe raised or lowered using the driver window switcheswhen the lockout feature is active.To restore power to the rear windows, press the buttonagain. The light on the button will go out.Sun VisorsPull the sun visor down to block glare. Detach the sunvisor from the center mount and slide it along the rod fromside-to-side to cover the driver or passenger side of thefront window. Swing the sun visor to the side to coverthe side window. It can be moved along the rod fromside-to-side in this position also.Lighted Visor Vanity MirrorYour vehicle has lighted visor vanity mirrors on both thedriver’s and passenger’s sun visors. Pull the sun visordown and lift the mirror cover to turn the lamps on.2-20
