To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.REMOTE DOOR UNLOCKThis feature allows you to select the type of feedbackyou will receive when unlocking the vehicle with theRemote Keyless Entry (RKE) transmitter. You will notreceive feedback when unlocking the vehicle with theRKE transmitter if the doors are open. See RemoteKeyless Entry (RKE) System Operation on page 2-5for more information.Press the customization button until REMOTE DOORUNLOCK appears on the DIC display. Press theset/reset button once to access the settings for thisfeature. Then press the customization button to scrollthrough the following settings:LIGHTS OFF: The exterior lamps will not flash whenyou press the unlock button on the RKE transmitter.LIGHTS ON (default): The exterior lamps willflash when you press the unlock button on theRKE transmitter.NO CHANGE: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.DELAY DOOR LOCKThis feature allows you to select whether or not thelocking of the vehicle’s doors and liftgate will be delayed.When locking the doors and liftgate with the power doorlock switch and a door or the liftgate is open, this featurewill delay locking the doors and liftgate until five secondsafter the last door is closed. You will hear three chimesto signal that the delayed locking feature is in use.The key must be out of the ignition for this feature towork. You can temporarily override delayed locking bypressing the power door lock switch twice or the lockbutton on the RKE transmitter twice. See DelayedLocking on page 2-10 for more information.Press the customization button until DELAY DOORLOCK appears on the DIC display. Press the set/resetbutton once to access the settings for this feature.Then press the customization button to scroll throughthe following settings:OFF: There will be no delayed locking of the vehicle’sdoors.ON (default): The doors will not lock until five secondsafter the last door or the liftgate is closed.NO CHANGE: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.3-68
