Programming Transmitters to theVehicleOnly RKE transmitters programmed to this vehicle willwork. If a transmitter is lost or stolen, a replacementcan be purchased and programmed through yourdealer/retailer. When the replacement transmitter isprogrammed to this vehicle, all remaining transmittersmust also be reprogrammed. Any lost or stolentransmitters will no longer work once the newtransmitter is programmed. Each vehicle can haveup to eight transmitters programmed to it. See “RelearnRemote Key” under DIC Operation and Displays onpage 4‑40 for instructions on how to match RKEtransmitters to your vehicle.Battery ReplacementReplace the battery if the REPLACE BATTERYIN REMOTE KEY message displays in the DIC.See “REPLACE BATTERY IN REMOTE KEY” underDIC Warnings and Messages on page 4‑48 foradditional information.Notice: When replacing the battery, do not touchany of the circuitry on the transmitter. Static fromyour body could damage the transmitter.To replace the battery:1. Separate the transmitter with a flat, thin objectinserted into the notch, located above themetal base.2. Remove the old battery. Do not use a metal object.3. Insert the new battery, positive side facing up.Replace with a CR2032 or equivalent battery.4. Snap the transmitter back together.3-6Ofrecido por www.electromanuales.com
