Universal Home RemoteSystemSee Radio Frequency Statement on page 9‑20for information regarding Part 15 of the FederalCommunications Commission (FCC) Rules andRSS-210/211 of Industry and Science Canada.Universal Home Remote SystemOperation (With Three Round LED)This vehicle may have the Universal Home RemoteSystem. If there are three round Light Emitting Diode(LED) indicator lights above the Universal HomeRemote buttons, follow the instructions below.This system provides a way to replace up to threeremote control transmitters used to activate devicessuch as garage door openers, security systems, andhome automation devices.Do not use this system with any garage door openerthat does not have the stop and reverse feature. Thisincludes any garage door opener model manufacturedbefore April 1, 1982.Read the instructions completely before attempting toprogram the transmitter. Because of the steps involved,it may be helpful to have another person assist withprogramming the transmitter.Be sure to keep the original remote control transmitterfor use in other vehicles, as well as, for futureprogramming. Only the original remote controltransmitter is needed for Fixed Code programming.The programmed buttons should be erased whenthe vehicle is sold or the lease ends. See “ErasingUniversal Home Remote Buttons” later in this section.Park the vehicle outside of the garage whenprogramming a garage door. Be sure that peopleand objects are clear of the garage door or gate thatis being programmed.3-54Ofrecido por www.electromanuales.com
