. A trailer was attached to the vehicle, or a bicycleor an object was hanging out of the tailgate duringthe last drive cycle. Once the attached object isremoved and the tailgate is raised, URPA willreturn to normal operation.. A tow bar is attached to the vehicle.. The vehicle's bumper is damaged. Take the vehicleto your dealer/retailer to repair the system.. Other conditions may affect system performance,such as vibrations from a jackhammer or thecompression of air brakes on a very large truck.If the system is still disabled, after driving forward atleast 40 km/h (25 mph), take the vehicle to your dealer/retailer.Rear Vision Camera (RVC)This vehicle may have a Rear Vision Camera system.Read this entire section before using it.The rear vision camera system is designed to helpthe driver when backing up by displaying a view of thearea behind the vehicle. When the driver shifts thevehicle into R (Reverse), the video image automaticallyappears on the navigation screen. Once the driver shiftsout of R (Reverse), the navigation screen will go back tothe last screen that had been displayed, after a delay.Turning the Rear Vision Camera System Onor OffTo turn the rear vision camera system on or off:1. Shift into P (Park).2. Press the CONFIG hard key to enter the configuremenu options, then press the CONFIG hard key toselect Display or touch the Display screen button.3. Select the Rear Camera Options screen button.The Rear Camera Options screen will display.4. Select the Video screen button. When the Videoscreen button is highlighted the RVC system is on.3-50Ofrecido por www.electromanuales.com
