NO CHANGE : No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.APPROACH LIGHTINGThis feature allows you to select whether or not to havethe exterior lights turn on briefly during low light periodsafter unlocking the vehicle using the Remote KeylessEntry (RKE) transmitter.Press the customization button until APPROACHLIGHTING appears on the DIC display. Press theset/reset button once to access the settings for thisfeature. Then press the customization button to scrollthrough the following settings:OFF : The exterior lights will not turn on when youunlock the vehicle with the RKE transmitter.ON (default) : If it is dark enough outside, the exteriorlights will turn on briefly when you unlock the vehiclewith the RKE transmitter.The lights will remain on for 20 seconds or until the lockbutton on the RKE transmitter is pressed, or the vehicleis no longer off. See Remote Keyless Entry (RKE)System Operation on page 3‑4 for more information.NO CHANGE : No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.AUTO HIGH BEAMSIf your vehicle has this feature, it allows you to select tohave the Intellibeam ® system turned off or on. SeeExterior Lamps on page 4‑10 for more information.Press the customization button until AUTO HIGHBEAMS appears on the DIC display. Press the set/resetbutton once to access the settings for this feature.Then press the customization button to scroll throughthe following settings:OFF (default) : The Intellibeam system will beturned off.ON : The Intellibeam system will be turned on.NO CHANGE : No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.4-60Ofrecido por www.electromanuales.com
