Windshield Washer FluidWhat to UseWhen windshield washer fluid needs to be added, besure to read the manufacturer's instructions before use.Use a fluid that has sufficient protection against freezingin an area where the temperature may fall belowfreezing.Adding Washer FluidThe vehicle has a low washer fluid message in the DICthat comes on when the washer fluid is low. Themessage is displayed for 15 seconds at the start ofeach ignition cycle. When the WASHER FLUID LOWADD FLUID message displays, you will need to addwasher fluid to the windshield washer fluid reservoir.Open the cap with thewasher symbol on it.Add washer fluid until thetank is full. See EngineCompartment Overviewon page 7‑14 forreservoir location.Notice:. When using concentrated washer fluid,follow the manufacturer's instructions foradding water.. Do not mix water with ready-to-use washerfluid. Water can cause the solution to freezeand damage the washer fluid tank and otherparts of the washer system. Also, water doesnot clean as well as washer fluid.. Fill the washer fluid tank only three-quartersfull when it is very cold. This allows for fluidexpansion if freezing occurs, which coulddamage the tank if it is completely full.. Do not use engine coolant (antifreeze) inthe windshield washer. It can damage thevehicle's windshield washer system andpaint.7-37Ofrecido por www.electromanuales.com
