How to Change the RSE Video ScreenSettingsThe screen display mode (normal, full, and zoom),screen brightness, and setup menu language can bechanged from the on screen setup menu. To changeany feature, perform the following:1. Press the z button on the remote control.2. Use the remote control Q , R , q , r navigationarrows and the r button to use the setup menu.3. Press the z button again to remove the setupmenu from the screen.Audio OutputAudio from the DVD player or auxiliary inputs can beheard through the following possible sources:. Wireless Headphones. Vehicle Speakers. Vehicle wired headphone jacks on the rear seataudio system, if your vehicle has this feature.The RSE system always transmits the audio signal tothe wireless headphones, if there is audio available.See “Headphones” earlier in this section for moreinformation.The DVD player is capable of outputting audio to thewired headphone jacks on the RSA system, if yourvehicle has this feature. The DVD player can beselected as an audio source on the RSA system. SeeRear Seat Audio (RSA) on page 4‑85 for moreinformation.When a device is connected to the A/V jacks, the rearseat passengers are be able to hear audio from theauxiliary device through the wireless or wiredheadphones. The front seat passengers are able tolisten to playback from this device through the vehiclespeakers by selecting AUX as the source on the radio.Video ScreenThe video screen is located in the overhead console.To use the video screen:1. Push the release button located on the overheadconsole.2. Move the screen to the desired position.When the video screen is not in use, push it up into itslocked position.If a DVD is playing and the screen is raised to its lockedposition, the screen remains on, this is normal, and theDVD continues to play through the previous audiosource. Use the remote control power button or ejectthe disc to turn off the screen.4-80Ofrecido por www.electromanuales.com
