Black plate (46,1)Cadillac CTS Owner Manual (GMNA-Localizing-MidEast-8087697) - 2015 -crc - 6/17/143-46 Seats and Restraints{ CautionDo not let the LATCHattachments rub against thevehicle’s safety belts. This maydamage these parts. If necessary,move buckled safety belts toavoid rubbing the LATCHattachments.Do not fold the empty rear seatwith a safety belt buckled. Thiscould damage the safety belt orthe seat. Unbuckle and return thesafety belt to its stowed position,before folding the seat.If you need to secure more than onechild restraint in the rear seat, seeWhere to Put the Restraint onpage 3-40.1. Attach and tighten the lowerattachments to the loweranchors. If the child restraintdoes not have lowerattachments or the desiredseating position does not havelower anchors, secure the childrestraint with the top tether andthe safety belts. Refer to yourchild restraint manufacturerinstructions and the instructionsin this manual.1.1. Find the lower anchors forthe desired seatingposition.1.2. Put the child restraint onthe seat.1.3. Attach and tighten the lowerattachments on the childrestraint to the loweranchors.2. If the child restraint manufacturerrecommends that the top tetherbe attached, attach and tightenthe top tether to the top tetheranchor, if equipped. Refer to thechild restraint instructions andthe following steps:2.1. Find the top tether anchor.2.2. Open the top tether anchorcover to expose the anchor.2.3. Route, attach, and tightenthe top tether according toyour child restraintinstructions and thefollowing instructions:
