Black plate (68,1)Cadillac Escalade/Escalade ESV Owner Manual (GMNA-Localizing-MidEast-6963932) - 2014 - crc - 5/21/133-68 Seats and RestraintsIf a child restraint has been installedand the on indicator is lit, see “If theOn Indicator is Lit for a ChildRestraint” under Passenger SensingSystem on page 3-39 for moreinformation.To remove the child restraint,unbuckle the vehicle safety belt andlet it return to the stowed position.Securing Child Restraints(Rear Seat Position)When securing a child restraint in arear seating position, study theinstructions that came with the childrestraint to make sure it iscompatible with this vehicle.If the child restraint has the LATCHsystem, see Lower Anchors andTethers for Children (LATCHSystem) on page 3-56 for how andwhere to install the child restraintusing LATCH. If a child restraint issecured in the vehicle using asafety belt and it uses a top tether,see Lower Anchors and Tethers forChildren (LATCH System) onpage 3-56 for top tether anchorlocations.Do not secure a child seat in aposition without a top tether anchorif a national or local law requiresthat the top tether be anchored, or ifthe instructions that come with thechild restraint say that the top strapmust be anchored.If the child restraint does not havethe LATCH system, you will beusing the safety belt to secure thechild restraint in this position. Besure to follow the instructions thatcame with the child restraint. Securethe child in the child restraint whenand as the instructions say.If more than one child restraintneeds to be installed in the rearseat, be sure to read Where to Putthe Restraint on page 3-54.The vehicle's lap-shoulder belts forthe first and second row seatingpositions are equipped withfree-falling latch plates. If thevehicle has a third row, thelap-shoulder belts have cinchinglatch plates.
