Black plate (58,1)Cadillac Escalade/Escalade ESV Owner Manual (GMNA-Localizing-MidEast-6963932) - 2014 - crc - 5/21/1310-58 Vehicle CareThere are two minutes to match thefirst tire/wheel position, andfive minutes overall to match all fourtire/wheel positions. If it takeslonger, the matching process stopsand must be restarted.The TPMS sensor matching processis outlined below:1. Set the parking brake.2. Turn the ignition to ON/RUN withthe engine off.3. Press Q and K on the RemoteKeyless Entry (RKE) transmitterat the same time forapproximately five seconds. Thehorn sounds twice to signal thereceiver is in relearn mode andTIRE LEARNING ACTIVEmessage displays on the DICscreen.4. Start with the driver sidefront tire.5. Place the relearn tool againstthe tire sidewall, near the valvestem. Then press the button toactivate the TPMS sensor.A horn chirp confirms that thesensor identification code hasbeen matched to this tire andwheel position.6. Proceed to the passenger sidefront tire, and repeat theprocedure in Step 5.7. Proceed to the passenger siderear tire, and repeat theprocedure in Step 5.8. Proceed to the driver side reartire, and repeat the procedure inStep 5. The horn sounds twotimes to indicate the sensoridentification code has beenmatched to the driver side reartire, and the TPMS sensormatching process is no longeractive. The TIRE LEARNINGACTIVE message on the DICdisplay screen goes off.9. Turn the ignition to LOCK/OFF.10. Set all four tires to therecommended air pressurelevel as indicated on the Tireand Loading Information label.Tire InspectionWe recommend that the tires,including the spare tire, if thevehicle has one, be inspectedfor signs of wear or damage atleast once a month.
