Black plate (19,1)Cadillac Escalade/Escalade ESV Owner Manual (GMNA-Localizing-MidEast-6963932) - 2014 - crc - 5/21/13Keys, Doors, and Windows 2-19See your dealer or a locksmith whocan service PASS-Key III+ to get anew key blank cut exactly as theignition key that operates thesystem.To program the new additional key:1. Verify that the new key has a 1stamped on it.2. Insert the original, alreadyprogrammed key in the ignitionand start the engine. If theengine will not start, see yourdealer for service.3. After the engine has started, turnthe key to LOCK/OFF, andremove the key.4. Insert the new key to beprogrammed and turn it to theON/RUN position withinfive seconds of turning theignition to the LOCK/OFFposition in Step 3.The security light will turn offonce the key has beenprogrammed.5. Repeat Steps 1 through 4 ifadditional keys are to beprogrammed.If you lose or damage yourPASS-Key III+ key, see your dealeror a locksmith who can servicePASS-Key III+ to have a newkey made.Do not leave the key or device thatdisarms or deactivates thetheft-deterrent system in the vehicle.Exterior MirrorsConvex Mirrors{ WarningA convex mirror can make things,like other vehicles, look fartheraway than they really are. If youcut too sharply into the right lane,you could hit a vehicle on theright. Check the inside mirror orglance over your shoulder beforechanging lanes.The passenger side mirror is convexshaped. A convex mirror's surface iscurved so more can be seen fromthe driver seat.
