User Manual - Rev AJ California Instruments• 410Hz for 5 sec.• 407Hz for 4 sec.LOW FRr 1 sec.• 380Hz for 4 sec..ec.9.6.1.7.3 EMERGENCY TESTin menu (Figure 9-33) scroll to the EMERGENCY AC entry using the upd keys. Press the ENTER key to select the EMERGENCY screens. The screenEQUENCYThis test will change the output frequency in the following sequence:• 375Hz fo• 390Hz for 5 sec• 393Hz for 4 sFrom the MIL704 maan down cursorwill appear as shown in Figure 9-36.Figure 9-36: Emergency MenuThe EMERGENCY SCREEN has the following tests:1 VOLTAGE2 FREQUENCYThe above tests can be selected by scrolling to the highlighted selection using the up and downkey and the ENTER key to start the selected test.This test will change the output voltage in the following sequence:te.• 118V for 1 minute.) will terminate the test at any time.FREQUThis test will change the output frequency in the following sequence:e ← key (backspace) will terminate the test at any time.VOLTAGE• 108V for 1 minu• 115V for 1 minute.The ← key (backspaceENCY• 393Hz for 1 minute.• 407Hz for 1 minute.• 400Hz for 1 minute.ThMX Series230
