Cannon Professional 60 Use And Installation Instructions

Also see for Professional 60: Use and Installation Instructions User instructions

10SETTING THE TIME OF DAYStep 1 Make sure all oven controls are turned Off.Step 2 Check the electricity supply to the cooker is turned on.Step 3 When switched on the display will show 0.00 and the Auto symbol, flashingintermittently.Step 4 Press & hold in both the Cook Period & End Time buttons together.Step 5 With the Cook Period & End Time buttons still held in, press either the "+" or "- "buttons to set the correct time of day.Step 6 Release all the buttons simultaneously. THE TIME OF DAY IS NOW SET.To change the time of day repeat Steps 4, 5 & 6 above.Note: You cannot adjust the time of day if the timer has been set for an Auto Cooking Programme.SETTING THE MINUTE MINDERStep 1 Ensure the time of day is set correctly.Step 2 Press and hold the Minute Minder button.Step 3 With the Minute Minder button held in, set the required Minute Minder period usingthe "+" and "-" buttons. A 'bell' symbol will light up.Release all buttons and the timer display will revert back to the time of day. The 'bell' symbolwill remain lit to signify that a Minute Minder period has been set.At the end of the set time an audible tone will be heard, and the 'bell' symbol will disappear.Step 4 To cancel the audible tone press the Minute Minder button.Note 1 When the Minute Minder has been set, the time remaining can be checked at any time by simply pressingthe Minute Minder button.Note 2 If necessary the Minute Minder can be cancelled before the tone sounds by pressing and holding theMinute Minder button and then at the same time pressing the "-" button until 0.00 appears in the displaywindow.AUTO 0 0 0..AUTO 0 0 0.0 0 0.0 0 0.AUTOOVEN TIMER OPERATION