Cannon Professional 60 Use And Installation Instructions

Also see for Professional 60: Use and Installation Instructions User instructions

9OVEN TIMER OPERATIONAUTO 0 0 0. CLOCKFACEThe timer incorporates a 24 hour clock.Ensure the correct time of day is always set, before using your cooker.SYMBOLSA 'bell' symbol will light up when you select a Minute Minder Period and will remain lit for theperiod set.At the end of the Minute Minder Period, the timer will emit an audible tone and the 'bell'symbol will disappear.The 'cookpot' symbol will light up either:-- When the timer is in manual mode, or- During the actual Cook Period.'AUTO' will light up:-- When the timer is first turned on it will flash. It will go out when a time of day is set orwhen the timer is set to manual.The 'AUTO' symbol will flash at the end of an Auto Cooking programme to indicate that theprogramme has finished.(When the 'AUTO' symbol is flashing, to return the oven to Manual operation, turn the oven controls off,and press the "Manual" button - The 'AUTO' symbol will go out).TIMER FUNCTION BUTTONSMinute Minder ButtonHere you can set a time period of up to 23 hours 59 minutes, that will count down. When it reaches zero, thetimer will emit an audible tone.For Example: If you set 20 minutes, the audible tone will occur 20 minutes later.AUTO COOKING PROGRAMMECook Period ButtonCook Period is the actual length of time for which, the timer will switch the oven(s) on as part of an "AutoCooking" programme. (e.g. If you set 2 hours, the food will be cooked for 2 hours).End Time ButtonThe time of day at which you want an "Auto Cooking" programme to end.For Example: If you set a "Cook Period" for 2 hours, and "End Time" of 11:00. The timer will switch the oven(s)on at 9:00 and turn the oven(s) off at 11:00. You will hear a audible tone at 11:00, to indicate that the AutoCooking Programme has finished.Notes:- When setting an Auto Cooking programme you will need to set the oven control(s) to the required temperature(s)when you set the timer.- If an Auto Cooking programme has been set the oven(s) will only operate during the pre-programmed time.Manual ButtonNeeds to be pressed to cancel an Auto Cooking programme and return the oven(s) to Manual operation."+" and "-" ButtonsUsed to adjust the various timer function settings.0 0 0.0 0 0.0 0 0.AUTO