4. MECHANICAL SYSTEM4-12 COPYRIGHT © 2001 CANON INC. CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)2. Removing the Developing Motor1) Remove the rear cover 1 and the rear cover 2.2) Remove the two screws, and remove the flywheel (left). (This applies only when removingthe M developing motor.)3) Remove the four screws each [1], anddisconnect the two connectors each [2]; then,remove the developing motor [3].Figure 4-203BC. Pick-Up Drive Assembly1. OutlineSee Figure 4-201C for how the pick-updrive belt is routed.Figure 4-201C[1][1][2] [3]
