5. INSTALLATION5-20 COPYRIGHT © 2001 CANON INC. CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)Step1234RemarksWorkFit the protrusion of the top of the beltretaining member into the T-shapedopening in the bottom plate of themachine.Slide the belt retaining member towardthe center of the machine so that the 6-mm dia. hole of the belt retainingmember and its corresponding 4-mmdia. hole in the bottom plate match.Using the M4x8 screws used to keepthe externals, secure the belt retainingmember to the base plate. Be sure totighten the screws while butting the beltretaining member upward and towardthe center of the machine.Likewise, mount the belt retainingmember to the right front, right rear, andleft rear.F. Mounting the Belt Retaining MembersBelt retainingmemberProtrusionProtrusion
