4. MECHANICAL SYSTEM4-98 COPYRIGHT © 2001 CANON INC. CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)4) While shifting the bearing at the front of theupper fixing roller, remove the upper fixingroller.6. Removing the Lower Fixing Roller1) Open the upper fixing roller (See chapter 4. X.FIXING SYSTEM, A-2. Opening the UpperFixing Roller Unit).2) Remove the lower fixing heater (See chapter4. X. FIXING SYSTEM, A-4. Removing theLower Fixing Heater).3) Remove the lower fixing roller metal fixing [1](one each from front and rear).4) While shifting the bearing (front, rear) of thelower fixing roller, remove the lower fixingroller [3].7. Removing the Fixing Thermistor(upper) Method 11) Open the upper fixing roller unit (See chapter4. X. FIXING SYSTEM, A-2. Opening theUpper Fixing Roller Unit).2) Remove the two fixing thermistor metal fixings[1].Figure 4-1011AFigure 4-1012A3) Free the cord of the thermistor from the cordclamp [2].4) Disconnect the connector, and remove thefixing thermistor (upper).[2][3][1][1][2]
