5. INSTALLATION5-36 COPYRIGHT © 2001 CANON INC. CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)Step1234567RemarksWorkTape the cover of the toner hopper inplace.Install the scanner metal fixing.• Insert the metal fixing through thelouver on the delivery side, and slide itto the rear to fix the scanner mirrormount in position.Tape the metal fixing in place.Open the copier's front cover (right/left).Release the lever of the fixing unit, andslide out the fixing unit.Open the external delivery unit and theinternal delivery unit; remove the fixingassembly lever (2 screws), fixingassembly knob (1 screw), and fixingassembly front cover (2 screws); then,remove the fixing assembly front cover.Loosen the two screws, and open thefixing assembly.Remove the two screws, and open thefixing assembly.Remove the screw from the rear of theupper oil pan; then, wait until all fixingoil has collected in the oil tank.III. RELOCATING THE MACHINEScanner metal fixingScrewScrewFixing assemblyfront coverKnobScrewFixing assemblylever Screws ScrewScrewFixing assemblyupper coverScrew Fixing assembly Screw
