Printing enlargements or reductions8. Select the width of the loaded roll in the M Roll Paper Width list-in this case, ISO A2/A3 Roll(420.0mm).9. In the A Page Size list, click the size of the original as specied in the application. In this case,click ISO A4 or Letter (8.5"x11").10. Select the C Enlarged/Reduced Printing check box.11. Click ISO A4 in the G Media Size list.12. Click F Scaling and enter “120.”Note• You can specify enlargement that exceeds the paper size, but in this case, the portion off the edge ofthe paper will not be printed.• If the original size after enlargement or reduction is smaller than the paper size, the original isprinted in the upper-left corner. In this case, you can center originals by selecting G Print Centeredon the Layout sheet.13. Conrm the print settings and print as desired.Note• For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.508)322 Enhanced Printing Options
