Messages regarding paperInsufcient paper for jobCause Corrective ActionFollow the steps below to replace the roll.1.Press the Load/Eject button and remove the roll.(→P.186)(→P.181)2.Load a roll with enough paper left.(→P.179)(→P.182)3.If no barcode was printed on the roll, specify thepaper type.(→P.188)4.Specify the paper length, unless a barcode hasbeen printed on the roll and you have deactivatedthe automatic detection function of the remainingroll paper.(→P.189)Hold down the Stop button for a second or more tocancel printing.The printer has received a print job longer than theamount of roll paper left.Press the Online button to resume printing.However, the roll paper may run out during theprint job and you may not be able to print all of thedocument.* When using the Media Take-up Unit, either hold down the Stop button for a second or more to cancelprinting or press the Online button to continue printing. However, if you continue printing, the roll papermay run out during the print job and you may not be able to print all of the document.No sheets.Cause Corrective ActionLoad paper of the type and size you have speciedin the printer driver.(→P.212)A sheet has not been loaded.Or, paper was removed during feeding.Hold down the Stop button for a second or more tocancel printing.Error Message 767
